• This email address is being protected from spambots. You need JavaScript enabled to view it.
  • 0740 250 256
Our pellets are produced from clean raw material, burning efficiency is good, the calories after burning are high and ash content is low..
It is very important in pellets production- that the raw material used for production to be clean and to be controlled.
The production process of our pellets contain next levels:
1. Peeling the bark from the logs
2. Cutting and chopping the wood and transforme the wood in sawdust
3. Drying the sawdust
4. Pelletizing the dried sawdust
Our pellets composition is: 80% beech + 20% fir/spruce
Important to know and to remember:
The caloric power for pellets produced from beech wood is higher than the pellets produced only from fir/spruce. (Usually pellets produced 100% from fir (spruce) are those who have the color white /yellow) .Hardwood (beech and oak) releases more heat than softwood (spruce and fir), also it has a longer burning process.
Pellets packaging: Polyethylene 15 kg bags, 78 sacks /pallet or in rafia BIG BAGS sacks (1 tona)
Wood pellets are wood waste, deshydrated and compressed up to twice the energy density of green wood.The pellet has a high calorific value, density, low transportation costs. Wood pellets gradually become a viable replacement, safe and environmentally to other conventional fuels: natural gas,GPL oil, coal, wood, oil, electricity


Pellet production provides the opportunity to use the waste products resulting from agriculture and forestry. Sawdust and wood chips from hardwood and coniferous trees (beech, spruce, fir, pine) are cleaned, crushed, packaged, formed and pressed using special machines. The stability of the lignin present is achieved by the timber or by adding a natural binder. The production process is carried out without the use of chemicals.

Through proper packaging, pellets has a high calorific value and are an ideal alternative of conventional resources.

Benefits of heating pellets:

  • They are organic from waste wood;
  • They are a source of clean energy, modern and cheap;
  • They have very high autonomy; Depending on the warehouse and automation built pellet boiler, pellet autonomy of central heating can be from 2 to 60 days
  • Producing pellets are made using such wood waste to produce a cleaning of the natural environment for soil polluting materials;
  • Pellets are neutral in terms of carbon emissions as burning emit about the same amount of CO2 (carbon dioxide) which was absorbed by the tree during its growth;
  • Smoke generation resulting from burning pellets is very low;
  • In flue gas dust is alkaline;
  • They have a low content of metal and sulphides are almost nonexistent;
  • The ash from burning pellets can then be used as natural fertilizer because it is rich in minerals
  • Cost pellet operation is lower than for fossil fuels
  • Making a comparison with results that firewood pellets are more efficient in terms of yield burning, calorific value, comfort and safety in use;
  • By making a comparison with a conventional gas boilers, pellet central heating consumes a cost for the same thermal power produced by approximately 20-30% lower; where it is compared with a gas central heating with condensing operation, which has better efficiency than a conventional one, a pellet boiler will consume a cost for the same caloric power, about the same;